Civil Defence approved fire alarm company providing fire alarm installation design, supply, testing in Dubai, Abu Dhabi and Sharjah, backed by a fast fire alarm repair service with 24/7 emergency response. Conventional and addressable systems for commercial, industrial and residential buildings, fully tested and handed over with authority approval support.
Your Trusted Fire Alarm Company in Dubai, Abu Dhabi & Sharjah
A fire alarm system detects a fire early and warns everyone in the building so they can get out safely. It is made up of smoke and heat detectors, manual call points, a fire alarm control panel, and sounders and flashers, all connected by cable or on a wired loop. When a device activates, the control panel shows where the alarm is and sounds the building alarm. Every commercial, industrial and residential building in the UAE needs a fire alarm system that meets Civil Defence requirements. Fire alarm installation is the full process of getting a compliant system working in your building: site survey, fire alarm system design and Civil Defence drawing approval, supply of the control panel and devices, cabling and installation, testing and commissioning, and handover with as-built documents. Done properly, the system works when it is needed and passes Civil Defence inspection. Firestone is a Civil Defence approved fire alarm company and fire alarm installation company serving Dubai, Abu Dhabi and Sharjah. Our fire alarm services cover design and engineering, installation, testing and commissioning, Annual Maintenance Contracts (AMC), fire alarm repair and 24/7 emergency breakdown support. Our certified technicians carry out preventive maintenance, inspections, system testing, emergency repair and compliance work to keep your fire alarm system safe and reliable.
Fire Alarm Installation and supply in UAE
Fire alarm control panels, detectors, sounders and manual call points, supplied and installed by certified technicians in Dubai, Abu Dhabi and Sharjah. Our fire alarm system installation includes design, testing, commissioning and handover to Civil Defence requirements.
Conventional vs Addressable Fire Alarm System in UAE
Choosing between a conventional and an addressable fire alarm system depends on your building’s size, layout, use and Civil Defence requirements. As a Civil Defence approved fire alarm company, we design, supply and install both types, with their fire alarm control panels, in Dubai, Abu Dhabi and Sharjah.
Conventional Fire Alarm System
In a conventional fire alarm system, detectors and manual call points are wired in zones, such as a floor or a wing. When a device activates, the fire alarm control panel shows which zone is in alarm, but not which device triggered it. Conventional systems are simple, reliable and usually cost less to install, which suits smaller buildings, shops, small offices and warehouses with a limited number of zones.
Addressable Fire Alarm System
In an addressable fire alarm system, each detector and call point has its own address on a wired loop, so the control panel shows exactly which device is in alarm and where it is. Loop wiring with isolators keeps the system working if a cable is damaged, and the system is easier to expand and to integrate with other life safety systems. Addressable systems suit larger buildings such as towers, malls, hospitals, hotels and industrial sites. Choose a conventional fire alarm system for smaller buildings with a limited number of zones, and an addressable fire alarm system where you need to know exactly which device is in alarm, or expect to expand the system later. Send us your building type and floor area and our fire alarm installation team will advise on the right system and give you a free quote.
Fire Detection System for UAE Buildings
A fire detection system is the part of a fire alarm system that senses fire early and reports it to the fire alarm control panel. Depending on the building, we install smoke and heat detectors, beam detectors, flame detectors, linear heat detection and VESDA air-sampling systems, all connected to the fire alarm control panel and designed to meet Civil Defence requirements in Dubai, Abu Dhabi and Sharjah. See our pages on VESDA systems, beam detectors, flame detectors and linear heat detection.
Fire Alarm Services in UAE
As a fire alarm system installation company in the UAE, Firestone provides every stage of a fire alarm project through one team: design, supply, installation, testing and commissioning, upgrades, fire alarm maintenance and repair. Whether you need a new system for a building under construction or work on an existing one, our fire alarm services cover Dubai, Abu Dhabi and Sharjah.
Fire Alarm installation,design and supply
We provide end-to-end fire alarm services in Dubai, Abu Dhabi and Sharjah, from design to handover: Design & Engineering — code-compliant fire alarm system design that meets Civil Defence requirements Supply & Installation — fire alarm control panels, detectors, sounders and call points, supplied and installed by certified technicians Testing & Commissioning — full fire alarm installation and testing, including cause and effect verification, before handover Upgrades, Retrofit & Expansion — upgrading or extending existing fire alarm systems for renovated or expanded buildings Programming & Documentation — control panel programming and zoning, plus as-built documents and handover records Hassantuk Connection — connecting your fire alarm system to the Hassantuk network in Dubai
Fire Alarm Maintenance, Repair & AMC
Regular maintenance keeps your fire alarm system reliable, supports Civil Defence compliance and keeps it ready for inspection. Our fire alarm maintenance covers contracts, planned servicing and fast repair. A well-maintained fire alarm system is a legal requirement and a critical safety measure. Our fire alarm AMC (Annual Maintenance Contract) keeps your system compliant, functional, and ready for inspection year-round.
Fire Alarm Repair Service — fast diagnosis and fault rectification, with faulty detectors, panels and accessories replaced Emergency Breakdown Service (24/7) — round-the-clock fire alarm repair and response in Dubai, Abu Dhabi and Sharjah Annual Maintenance Contract (AMC) — scheduled visits to keep your fire alarm system compliant and operational Preventive Maintenance (PPM) — detector cleaning and calibration, panel health checks and battery tests to catch issues early Battery Replacement Service — routine fire alarm battery replacement to maintain backup power
Common questions about fire alarm installation, AMC and maintenance in Dubai, Abu Dhabi and Sharjah
Last updated: October 2026
The four main types of fire alarm systems are conventional, addressable, analogue addressable and wireless. Conventional systems wire detectors in zones. Addressable systems give each device its own address on a loop. Analogue addressable systems send readings from each detector, such as smoke level, to the control panel, which decides when to raise the alarm. Wireless systems use radio signals instead of cable. Firestone designs, supplies and installs conventional and addressable fire alarm systems in Dubai, Abu Dhabi and Sharjah.
The cost of installing a fire alarm system in the UAE depends on the building’s size, the number of zones or devices, whether the system is conventional or addressable, the cabling, and Civil Defence approval requirements. Addressable systems usually cost more upfront than conventional ones. Firestone gives a free quote after reviewing your drawings or visiting the site, so send us your building type and floor area to get started.
There is no official ranking of fire alarm companies in Dubai, so check four things before you choose: approval by the local civil defence authority (DCD in Dubai, ADCD in Abu Dhabi, SCD in Sharjah), experience with your type of building, Hassantuk support in Dubai, and after-sales maintenance with 24/7 repair. Firestone is a Category A civil defence approved contractor that has worked in the UAE since 2007, and designs, supplies, installs and maintains fire alarm systems.
Hassantuk connection is required for eligible buildings in Dubai. Hassantuk is Dubai Civil Defence’s smart fire alarm monitoring system. Firestone checks whether your building needs it, upgrades the fire alarm control panel if necessary, and supports the connection and registration with Dubai Civil Defence.
No. Firestone supplies fire alarm control panels, detectors, sounders and call points together with installation, testing and commissioning by certified technicians. This keeps the system compliant and covered by one contractor.
Yes. Firestone assesses your existing panel and devices, then extends or upgrades the fire alarm system for renovated or expanded buildings. This includes compatibility checks, panel reprogramming and updated as-built documents at handover.
Yes. Firestone provides fire alarm maintenance, planned servicing and 24/7 emergency repair for the systems it installs and for existing systems. Maintenance contracts are available in Dubai, Abu Dhabi and Sharjah.
If your fire alarm shows a fault or keeps giving false alarms, report it to a fire alarm technician and do not disconnect or bypass the system. Common causes are dirty or faulty detectors, low batteries, wiring faults and failed devices. Firestone’s fire alarm repair service offers diagnosis and 24/7 emergency response in Dubai, Abu Dhabi and Sharjah.
A fire alarm system detects fire and warns people to evacuate. It consists of detectors, manual call points, a fire alarm control panel, and sounders and flashers, connected by cables or a loop. When a device activates, the panel shows where the alarm is and sounds the building alarm. Firestone designs, supplies and installs conventional and addressable systems in the UAE.
A fire alarm installation follows six steps: site survey and risk assessment, system design and Civil Defence drawing approval, selection of the control panel and devices, installation and cabling, testing and commissioning, and handover with as-built documents. Firestone manages each step, so one contractor is responsible from design to handover in Dubai, Abu Dhabi and Sharjah.
Yes. In the UAE, a fire alarm system must meet Civil Defence requirements, and the design is normally approved before installation, with testing and inspection before handover. The authority is Dubai Civil Defence (DCD) in Dubai, Abu Dhabi Civil Defence (ADCD) in Abu Dhabi and Al Ain, and Sharjah Civil Defence (SCD) in Sharjah. Firestone prepares the drawings and manages the approval process.
Choose a fire alarm company approved by Abu Dhabi Civil Defence (ADCD) with experience in your type of building, in-house design and drawings, testing and commissioning before handover, and 24/7 repair support. Firestone is a Category A civil defence approved contractor with an office in Musaffah, Abu Dhabi, and handles design, supply, installation and approvals.
Yes. Firestone designs, supplies, installs and tests fire alarm systems in Sharjah to Sharjah Civil Defence (SCD) requirements and provides 24/7 repair. Our Sharjah office is in the Industrial Area, and we also work in Dubai and Abu Dhabi.
Firestone has offices in Musaffah M4 in Abu Dhabi, Umm Ramool in Dubai and the Industrial Area in Sharjah. Our teams design, supply, install and maintain fire alarm systems from these offices. Contact us to arrange a site visit.
Yes. Firestone offers affordable fire alarm installation in the UAE. We keep costs sensible by recommending the right system for your building, conventional for smaller sites or addressable for larger ones, and by handling design, supply and installation ourselves. You receive an itemised free quote, so you know the full cost before work starts. Request a quote.
The time depends on the building size, the number of devices, cable routes, site access and Civil Defence approval. As a guide, a small shop or office can often be installed and tested within a few days, while larger buildings take several weeks. Firestone gives a programme with your free quote, so you know the timeline before work starts.
Hassantuk System in Abu Dhabi: Installation, Connection & Compliance
Hassantuk is the smart fire monitoring network run by Abu Dhabi Civil Defence (ADCD) from its Emergency Operations Center. Instead of waiting for someone to phone in a fire, a connected building sends its alarm signals to the center automatically, using machine-to-machine (M2M) technology. The aim is prevention and early detection, so help is on its way before a small incident becomes a serious one. assantuk monitors your fire alarm, firefighting, and gas detection systems in real time. When something triggers, ADCD receives the exact location and status of the alarm and can dispatch teams at once. It covers the whole Emirate of Abu Dhabi and every type of building, from warehouses and factories to high-rise towers, including residential, commercial and industrial properties.
Hassantuk System Services in Abu Dhabi
Hassantuk compliance check of your existing fire alarm system
Fire alarm control panel upgrade or replacement for Hassantuk connection
Repair of detectors, wiring and faults that stop a building from connecting
Hassantuk connection support and Civil Defence approval
Fire alarm AMC and fault monitoring to keep your system compliant after connection
Not sure if your building meets Hassantuk requirements? As a Civil Defence approved fire alarm company in Abu Dhabi, our engineers survey your current system and manage the upgrade or new fire alarm installation, from design to approval. Already connected? See our fire alarm maintenance in Abu Dhabi.
Looking for a Reliable fire and Safety company?
We deliver certified Fire and security systems tailored to your facility’s needs.