A fire alarm system is only as reliable as the cable feeding it — if the cable fails in a fire, it doesn't matter how good the panel or detectors are. Fire rated cable is built to keep circuits alive under fire conditions, which is exactly why life safety systems, emergency lighting, and fire alarm wiring can't run on standard electrical cable.We supply and install fire rated cable across Abu Dhabi, Dubai, Sharjah, and Al Ain, sourcing recognized fire rated electrical cable brands and specifying the correct type and standard for each installation rather than defaulting to whatever's cheapest to stock.
Fire rated cable is designed to maintain circuit integrity for a specified duration under fire conditions, so critical systems — fire alarms, emergency lighting, smoke extraction, sprinkler pumps — keep functioning while a building's being evacuated. It's tested to standards like BS 6387 or IEC 60331, which define exactly how long a cable has to keep carrying current while exposed to flame.This is different from standard flame retardant cable, which resists catching fire itself but isn't guaranteed to keep a circuit alive once flame reaches it. Life safety circuits specifically need fire rated cable, not just flame retardant — mixing the two up is a common spec mistake we catch on site reviews.
FP200 is one of the most widely specified fire rated cable types in the UAE market, used across fire alarm circuits, emergency lighting, and other life safety wiring. We supply and install FP200 in the gauges and core configurations a project calls for, sourced from recognized manufacturers rather than unbranded stock that can't back up its rating with real certification.
Standard electrical cable insulation melts or burns through within minutes of fire exposure, taking down any circuit running through it — and that's a problem when the circuit is powering fire alarms, emergency lighting, smoke extraction fans, sprinkler pumps, or evacuation announcements at exactly the moment they're needed most. Fire rated cable is tested to standards like BS 6387 and IEC 60331 to keep carrying current for a defined period even while directly exposed to flame, giving people time to evacuate and fire services time to respond instead of the building's own safety systems failing first. It's why civil defence authorities specifically require it on life safety circuits — not as best practice, but as a compliance requirement, since the consequence of getting it wrong is exactly the kind of failure this cable exists to prevent.
Not every circuit in a building needs fire rated cable — it's specifically for the systems that have to keep working once a fire's already started. That includes fire alarm and detection wiring, emergency lighting circuits, smoke and heat extraction fans, sprinkler and pump control circuits, fire door hold-open devices, and public address or voice evacuation systems.Civil defence and building fire strategies typically specify exactly which circuits require it, based on the building type and its life safety design — a hospital or high-rise tower will have a longer list of fire-rated circuits than a small retail unit. We can review a project's fire strategy and confirm which circuits actually need fire rated cable versus standard wiring, so you're not over-specifying it where it isn't required or under-specifying it where it is.
The most common mistake we see on site isn't the cable itself — it's what happens around it. A correctly rated cable that's clipped through an unsealed penetration, run alongside standard cable without proper separation, or terminated with the wrong glands can lose its fire performance even though the cable spec on the drawing was right. The rating is only as good as the whole installation, not just the product.The second common mistake is confusing flame retardant cable with fire rated cable at the spec stage — they're not interchangeable, and a life safety circuit built on the wrong one won't hold up under civil defence inspection or, worse, under an actual fire. We check the spec against the circuit's actual function before supply, not just against what's written on the drawing, since drawings occasionally carry this mix-up forward without anyone catching it.
Contractors and consultants searching for a fire rated cable supplier in the UAE are usually trying to solve two problems at once — sourcing cable that actually meets the spec on the drawing, and finding someone who can back that up with proper certification when civil defence asks for it. We supply fire rated cable from recognized manufacturers with documentation to match, so what arrives on site is what the project actually needs, not a close substitute with a similar-sounding name.We work with contractors across Abu Dhabi, Dubai, Sharjah, and Al Ain, supplying cable for both new installations and projects that need to replace non-compliant wiring found during an inspection or audit. If you've got a bill of quantities or a fire strategy drawing, send it over and we'll quote against the exact spec rather than a generic estimate.
We deliver certified Fire and security systems tailored to your facility’s needs.